How to Set Up the Hayati Pro Max+Updated 2 hours ago
The Hayati Pro Max+ is a high-capacity refillable pod kit that is straightforward to set up. Follow the five steps below and you will be ready to vape in minutes.
Remove all packaging
Take the Hayati Pro Max+ out of the box and remove all packaging materials from the device, pod, and refill container. Check there are no plastic wrappings or inserts left on any of the components before moving on.
Remove the silicone seals
Locate and remove all silicone seals from the device, pod, and refill container. These are fitted to protect the components during transit and shipping. Check each part carefully, as leaving any seal in place will prevent the device from firing or the e-liquid from flowing correctly.
Combine the pod with the refill container
Attach the refill container to the pod by pressing them firmly together until they connect securely. This allows e-liquid to flow from the container into the pod. Make sure the connection is tight before inserting the unit into the device.
Insert the combined unit into the device
Slide the combined pod and refill container into the device. Push it in firmly until you feel or hear it click into place. If the unit feels loose, remove it and reinsert to ensure a secure connection.
Inhale to activate
The Hayati Pro Max+ is draw-activated, so there are no buttons to press. Simply inhale steadily on the mouthpiece to begin vaping. If this is a new device or coil, we recommend a few short, gentle puffs first to help prime the coil before vaping normally.
Frequently asked questions
How do I set up the Hayati Pro Max+ step-by-step?
Remove all packaging and silicone seals, combine the pod with the refill container, insert the combined unit into the device until it clicks, then inhale to activate. No buttons or settings are required.
Where can I find the official Hayati Pro Max+ setup guide?
The full setup guide is included in the box with your device. You can also find it here on the Vape Superstore Help Centre.
Do I need to configure any settings on the Hayati Pro Max+?
No. The Hayati Pro Max+ requires no settings or configuration. It is draw-activated straight out of the box once assembled.
Why is my Hayati Pro Max+ not working?
The most common causes are a silicone seal that has not been fully removed, the pod and refill container not being properly connected, or the combined unit not being fully seated in the device. Check each of these first. If the device still does not work, the battery may need charging via the USB-C port. If the issue persists, contact our support team and we will be happy to help.
Need more?
View the full Hayati Pro Max+ device or shop replacement Hayati Pro Max+ Pods and Refills. If you need further assistance, contact our support team.